Thinking About Green Engineer Training – An A-Z
It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. When ‘Green’, they are all thought to be replenishable and natural. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-efficiency and planet friendly options.
In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. Moving on from this there are the Photovoltaic Panels (PV’s) which can generate electricity from your roof. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.
Thermal Energy Systems: This technology is based around two core types of system. Firstly, there are elements that absorb energy from the sun and create hot water – known as Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.
For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.
Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.
By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.
Systems Using Geo-Thermal Energy – Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greater return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production – as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.
The Hydropower process uses a turbine that can convert the energy from one form into another. It is by either water ‘drop-offs’, or Natural River runs, that turbines can work through this process. ‘Micro-Hydro’ utilises a chunk of the outdated sluices and dam systems that have been killed off by the large national distribution methods. Whilst considered a smaller form of electrical output, this system is thought to be able to give some 200mW of capacity to the UK. Between 200 pounds and 3k per KW of energy output, is a good estimate of the overall cost of a project such as this.
Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.
It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. It is by gaining the right certificates that will provide opportunities and job security for the long term. Look for combined electrical and plumbing training, with a key emphasis on practical green systems and installation.
Author: Scott Edwards. Pop to www.electricalcoursegb.co.uk/RenewableEnergyCertification.html or Green Engineer Certification.